|
With the new PRO MEDIA DI/ PLI-04, Palmer introduces an immediately available DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack input for use with the headphone output of a Laptop or similar device. The outputs are conventional transformer balanced XLR sockets, as used in professional PA systems, guaranteeing an electrically decoupled signal, a prerequisite to ensure noise-free operation. One other special feature which should not be forgotten! Although the PLI-04 is primarily a stereo unit, it can be switched to mono, with the two stereo signals summed and fed to both XLR outputs. The PLI-04 manifests a mechanically robust unit combined with outstanding technical specifications, adding to the list of high quality products that have come to be expected from Palmer.
FEATURES:
[ Inputs: 2x 6.3mm TRS-Jack, [ Tip= +phase (hot) [ Ring= -phase (cold) [ Sleeve= screening [ ground 2x RCA phono sockets and 1x 3.5mm stereo jack [ Input Impedance: 6kohms at 600 ohms [ load Input Level: 6dBu @30Hz/0.05%THD, 16dBu @30Hz/0.33%THD [ Outputs: 2x XLR male, Pin 1 ground, Pin 2 pos. phase (hot), Pin 3 neg. phase (cold) Transformer [ balanced Output Impedance: 600 ohms [ Gain reduction input to output: 10dB, transformer ratio: 3.16 : 1 [ Frequency response: 20Hz - 20kHz ± 0.5dB, [ Phase response: less than 3°degree deviation [ Mono switch: 3 position ground lift switch: lift, ground, soft ground [ Aluminium die cast housing: 125 x 95 x 35mm
|
|